• Home
  • News & Updates

News & Updates

January 14, 2025
Elevating Workplace Safety: Introducing Our New Fall Protection Training  

Get 15% discount on Danatec's new Fall Protection Training, for a limited time! Use code GET15OFF Falls are one of the most significant causes of workplace incidents across the country. According to the Association of Workers' Compensation Boards of Canada (AWCBC), on a five-year average, over 49,540 workers get injured…

Read more

Latest

November 18, 2022

Developing an Electrical Safety Program for your Workplace

An electrical safety program is an essential part of workplace safety. If an employee is doing work on or near equipment or areas that may pose an electrical hazard, it’s…
Read more
October 1, 2018

CSA Z462 and Risk Assessment

Written by Terry Becker, P.Eng., CESCP, IEEE Senior Member CSA Z462 and Risk Assessment Introduction to Risk Assessment in CSA Z462 The CSA Z462 Workplace electrical safety Standard, both the…
Read more
August 22, 2018

Arc flash should not be your priority!!

Written by Terry Becker, P.Eng., CESCP, IEEE Senior Member Arc flash should not be your priority!! What I see happening in the industry across Canada and the USA in the…
Read more
July 5, 2018

Danatec Releases 12 New Online Safety Courses

FOR IMMEDIATE RELEASE: JULY 5, 2018 Danatec Educational Services Ltd. 1-800-465-3366 DANATEC RELEASES 12 NEW ONLINE SAFETY COURSES   Electrical Safety and Joint Health and Safety Committee lead new material charge Calgary, Alberta:…
Read more
June 5, 2018

Electrical Safety Programs for Electrical Contractors

By Terry Becker, P.Eng., IEEE Senior Member, CESCP Too often I am told by Electrical Contractors that they have a policy that says they do not work energized;  therefore they…
Read more
May 15, 2018

May Is Electrical Safety Month – Arc Blast Pressure – 40 cal/cm2 Myth

MAY IS ELECTRICAL SAFETY MONTH ARC BLAST PRESSURE – 40 cal/cm2 MYTH By Terry Becker, P.Eng., IEEE Senior Member, CESCP I have been communicating this myth to clients and industry for over…
Read more
February 27, 2018

New Arc Flash Risk Assessment Process

Written by Terry Becker, P.Eng., CESCP, IEEE Senior Member All electrical incidents are preventable! Keep employees safe with an up to date Electrical Safety Program and appropriate compliant electrical safety training.…
Read more
January 19, 2018

What is Arc Flash Training?

Written by Jim Pollard Original article was published in The Ontario Electrical Contractor magazine, volume 55, issue 4, Q4 2017 The term “arc flash training” has become part of our…
Read more
January 9, 2018

CSA Z462 2018 Are You Ready? What Should You Do?

Submitted by Terry Becker, P.Eng., CESCP, IEEE Senior Member The next Edition of the CSA Z462 Workplace electrical safety Standard will publish in January 2018. If you have read previous…
Read more